1/35
Sandbags
1/35 Stowage and
Camouflage Net Accessories
1/35 Bumpers and
Accessories for Amphibious Vehicles and Small Craft
1/48 Bumpers and Accessories for Amphibious Vehicles and Small Craft
1/72 Bumpers and Accessories for Amphibious Vehicles and Small Craft
1/72
Helicopter Landing Nets
1/16
Sandbags
Hand-made Sandbags for
1/35 Models
TWSB1
Sandbags (set of 10) Price: $10 CDN
(2 sets for $18, 3 sets for $25)
-
Set of ten cotton sandbags, with
drawstrings, for use with any 1/35 models. These sandbags come empty, and
can be filled with sand, plaster, or other materials to the desired fullness
and then positioned as you see fit. Ideal for sandbag armour on vehicles,
holding down gun trails or mortar baseplates, revetments, trench walls, or
anything else that real sandbags are used for.
-
-
Hand-made Stowage and
Camouflage Net
Products for
1/35 Models
Important notes about camouflage net products!
- Please
note, when installing camouflage barrel wraps on barrels with muzzle brakes,
that the barrel wrap must be installed before the muzzle brake
is fitted to the gun. The barrel wrap will not slip over the
muzzle brake. Thanks to the AMPS review crew for reminding me to make this
clear to our users!
- When
ordering camouflage net stowage or barrel wraps, please specify summer or
winter colours for the scrim used on the nets. The photo below shows examples
of TWN02 with summer scrim (top) and winter scrim (bottom).
TWN01
Camouflage Net Stowage (Small) (Set of 2) Price: $10 CDN
-
Set of two rolled camouflage nets
with scrim as seen stowed on the sides of Commonwealth tanks such as
Shermans, Cromwells, and Churchills. Please specify summer or winter colours.
-
-
TWN02
Camouflage Net Stowage (Medium) Price: $10 CDN
-
Rolled camouflage net with scrim as
seen stowed on the many Allied vehicles, from jeeps and halftracks to
Shermans and other tanks. Please specify summer or winter colours.
-
-
TWN03
Stowage Nets (Set of 2) Price: $10 CDN
-
A pair of stowage nets as seen on
Indian Pattern Carriers in the North African campaign, but suitable for
other vehicles as well.
-
TWN04
Camouflage Barrel Wrap (75 mm.) Price: $10 CDN
-
Camouflage net with scrim as seen
wrapped around the barrels of Commonwealth tanks (Cromwell, Churchill, and
Sherman) armed with 75mm. guns. Please specify summer or winter colours.
TWN05 Camouflage Barrel Wrap (17 pdr.) Price: $15 CDN
-
Camouflage net with scrim as seen
wrapped around the barrels of Commonwealth vehicles (Sherman Firefly,
Achilles, Challenger) armed with 17 pdr. guns. Please specify summer or
winter colours.
TWN06 1/35 Camouflage Barrel Wrap (77
mm.)
Price: $15 CDN
-
Camouflage net with scrim as seen wrapped around the barrels of Commonwealth
vehicles (e.g., Comet) armed with 77 mm. guns. Please specify summer or
winter colours.
TWN07 1/35 Cromwell Turret and Barrel
Camouflage Wrap
Price: $25 CDN
-
Camouflage net with scrim as seen
wrapped around the turrets and barrels of Cromwell cruiser tanks in Normandy
and beyond (for 75mm.-armed versions). Please specify summer or winter colours.
TWN08 1/35 Comet Turret and Barrel
Camouflage Wrap
Price: $30 CDN
-
Camouflage net with scrim as seen
wrapped around the turrets and barrels of Comet cruiser tanks during World
War II. Please specify summer or winter colours.
TWN09 1/35 Sherman/Firefly Full Turret
Camouflage Wrap
Price: $15 CDN
-
Camouflage net with scrim as seen
wrapped around the turrets of Sherman tanks with stowage boxes and Fireflies during World
War II. NOTE: barrel wraps (TWN04 for 75mm. or TWN05 for 17 pdr.) sold
separately. Please specify summer or winter colours.
TWN10 1/35 Sherman/Firefly Turret Camouflage Wrap Type
B
Price: $15 CDN
-
Camouflage net with scrim as seen
wrapped around the turret front and sides of Sherman tanks and Fireflies during World
War II. NOTE: barrel wraps (TWN04 for 75mm. or TWN05 for 17 pdr.) sold
separately. Please specify summer or winter colours.
TWN11 1/35 Churchill Turret
Price: $15 CDN
-
Camouflage net with scrim as seen
wrapped around the turret front and sides of Churchill infantry tanks during World
War II. NOTE: 75mm. barrel wraps (TWN04) sold separately. Please specify summer or winter colours.
TWF01 1/35 Bread Products Price: $5 CDN
-
Set of ten different bread products
(two each of five different types). Made from real bread dough!
-
Hand-woven Bumpers and
Accessories for
1/35 Models
TW001 Woven Bumpers for 1/35 DUKW Price: $25 CDN
-
Set of six woven bumpers for 1/35 Italeri and Airfix DUKW kits.
TW002 Woven Bumpers for 1/35 LCM, LCVP, LCA, etc. (Type
A)
Price: $25 CDN
-
Set of six woven single loop bumpers for 1/35 Italeri and Trumpeter LCM
(3), 1/35
Italeri LCVP, 1/35 FM LCA, and other landing craft kits.
TW003 Woven Bumpers for 1/35 Ford GPA Amphibious Jeep
Price: $20 CDN
-
Set of four woven bumpers for 1/35 Tamiya Ford GPA amphibious jeep
kit.
-
-
TW004 1/35 Cross Type Cargo Net
Price: $25 CDN
-
1/35 US cargo net developed for use
with DUKW and other US equipment. Suitable for use in late World War
II and postwar settings.
-
TW005 Woven Bumpers for 1/35 LCM (3)
(Type B)
Price: $25 CDN
-
Set of five woven double loop bumpers for 1/35 Italeri and Trumpeter LCM
(3) kits.
TW006 1/35 Generic Cargo Net
Price: $15 CDN - New Lower Price!
-
1/35 square cargo net as seen in
various settings throughout the 20th century.
-
TW007 1/35 Land Wasser Schlepper Mid
Production
Price: $60
CDN
-
Set of four woven bumpers for the 1/35
Bronco Land Wasser Schlepper middle production kit
(#35015). If you have Hobby Boss kit (#82433), please order
TW019.
This set accurately reflects the distinct bumper configuration on
middle-production Land Wasser Schleppers, which have a bow bumper, two long
side bumpers, and a short rear bumper.
-
TW008 1/35 Jeep Tow Ropes
Price: $5
CDN
-
Set of two tow ropes as commonly seen
wrapped around Jeep front bumpers during World War II.
TW009 1/35 Royal Marines DUKW (1998)
Price: $30
CDN
-
Set of five woven bumpers for 1/35
Italeri and Airfix DUKW kits to depict a vehicle still in service with the Royal
Marines in 2009.
-
TW010 1/35 DUKW Bumpers (Type B)
Price: $25 CDN
-
Set of six woven bumpers (two connected
pairs on each side of the bow and two bumpers at the stern) for 1/35 Italeri
and Airfix DUKW kits.
-
TW011 1/35 Amtrac Rope Coils (Type A)
Price: $7 CDN
-
Set of two coiled tow ropes as commonly seen
on the bows of AAVP-7s.
-
-
TW012 1/35 Land Wasser Schlepper Late
Production
Price: $60
CDN
-
Set of three woven bumpers for the 1/35
Bronco Land Wasser Schlepper late production kit
(#35020). If you have Hobby Boss kit (#82430), please order
TW020.
This set accurately reflects the distinct bumper configuration on
late-production Land Wasser Schleppers, which have a bow bumper that has a
distinctive pinch and two long
side bumpers that wrap around the rear of the vehicle.
-
TW013 1/35 Amtrac Rope Coils (Type B)
Price: $7 CDN
-
Set of two coiled tow ropes as commonly seen
on the bows of AAVP-7s.
-
TW014 1/35 Amtrac Rope Coils (Type C)
Price: $7 CDN
-
Large coil of tow ropes as commonly seen
on the bows of AAVP-7s.
-
TW015 1/35 Amtrac Rope Coils (For
Internal Stowage)
Price: $7 CDN
-
Set of two coiled tow ropes as commonly
seen stowed inside AAVP-7s.
-
TW016 1/35 Amtrac Tow Ropes (Uncoiled)
Price: $7 CDN
-
Set of two tow ropes as commonly seen
on the rear decks of AAVP-7s.
TW017 1/35 MTB Fenders
Price: $25 CDN
-
Set of four crocheted fenders as seen
on World War II British motor torpedo boats and other small craft. Suitable
for Italeri kit #5610 or other 1/35 military or civilian small craft.
-
TW018 1/35 Sherman BARV Bow Bumper
Price: $15 CDN
-
Single bumper with extra thread to
replicate the woven bumper seen on the bow of Sherman BARVs.
-
TW019 1/35 Land Wasser Schlepper Mid
Production
Price: $60
CDN
-
Set of four woven bumpers for the 1/35
Hobby Boss Land Wasser Schlepper middle production kit (#82433).
This set accurately reflects the distinct bumper configuration on
middle-production Land Wasser Schleppers, which have a bow bumper, two long
side bumpers, and a short rear bumper.
-
TW020 1/35 Land Wasser Schlepper Late
Production
Price: $60
CDN
-
Set of three woven bumpers for the 1/35
Hobby Boss Land Wasser Schlepper late production kit (#82430).
This set accurately reflects the distinct bumper configuration on
late-production Land Wasser Schleppers, which have a bow bumper that has a
distinctive pinch and two long
side bumpers that wrap around the rear of the vehicle.
-
TW021 1/35 Kinetic Tow Ropes (Set of 2)
Price: $10 CDN
-
Set of two synthetic tow ropes of the
type seen on the British CVR(T) family and other modern vehicles. If you
would like to order a set of these with resin tow shackles, they are
available from
Scorpion Miniature Models.
-
-
Hand-woven Bumpers for
1/48 Models
TW101 Woven Bumpers for 1/48 DUKW Price: $20 CDN
-
Set of six woven bumpers for 1/48 DUKW kits
(designed for Gaso.line kit, although they can also be used with
the Hart Models resin kit and 1/48 and 1/50 diecast DUKW models).
-
-
TW102 Woven Bumpers for 1/48 LCM (3) Price: $20 CDN
-
Set of six woven bumpers for 1/48 Hobby
Boss LCM (3) kit. Also suitable for the Monogram 1/48 Swift Boat and
RAG Boat kits.
-
TW103 Woven Bumpers for 1/48 LCM (3)
(Type B)
Price: $20 CDN
-
Set of five woven bumpers for 1/48 Hobby
Boss LCM (3) kit.
-
TW104 Woven Bumpers for 1/48 DUKW (Type
B)
Price: $20 CDN
-
Set of six woven bumpers (two connected
pairs on each side of the bow and two bumpers at the stern) for 1/48 DUKW
kits (designed for Gaso.line kit, although they can also be used with
the Hart Models resin kit and 1/48 and 1/50 diecast DUKW models).
TW105 1/48 Generic Cargo Net
Price: $15 CDN
-
1/48 square cargo net as seen in
various settings throughout the 20th century.
TW106 1/48 36' USCG Motor Life Boat
Bumper Set
Price: $15 CDN
-
Set of three woven bumpers plus
additional thread to detail the Glencoe 1/48 U.S. Coast Guard Rescue Boat
(kit #5301).
Hand-woven Bumpers for
1/72 Models
TW201 Woven Bumpers for 1/72 DUKW Price: $20 CDN
-
Set of six woven bumpers for 1/72
Italeri DUKW kit.
-
TW202 Woven Bumpers for 1/72 LCM/LCVP Price: $20 CDN
-
Set of six woven bumpers for 1/72 and
1/76 scale LCM (3) and LCVP kits.
TW203 1/72 Generic Cargo Net
Price: $12 CDN - New Lower Price!
-
1/72 square cargo net as seen in
various settings throughout the 20th century.
TW204 1/72 Royal Marines DUKW (2009)
Price: $25 CDN
-
Set of five woven bumpers for 1/72
Italeri DUKW kit to depict a vehicle still in service with the Royal Marines in
2009.
TW205 1/72 Woven Bumpers for LCM (Type
B)
Price: $20 CDN
-
Set of five woven bumpers for 1/72 and
1/76 scale LCM (3) kits.
TW206 1/72 Woven Bumpers for GPA
Amphibious Jeep
Price: $15 CDN
-
Set of four woven bumpers for 1/72
scale Academy and Planet Models GPA kits.
TW207 1/72 Woven Bumpers for Land Wasser
Schlepper
Price: $40 CDN
-
Set of three woven bumpers for the 1/72
Hobby Boss Land-Wasser-Schlepper early production kit
(#89218). This set accurately reflects the distinct bumper configuration on
late-production Land Wasser Schleppers (which the Hobby Boss kit is,
according to its tracks and sprockets), which have a bow bumper that has a
distinctive pinch and two long
side bumpers that wrap around the rear of the vehicle.
TW208 1/72 RAF Rescue Launch Scramble
Nets
Price: $20 CDN
-
Set of two nets for the 1/72 Airfix RAF
Rescue Launch kit.
Hand-made Landing Nets for
1/72 Helicopters
TWH01
1/72 Helicopter Landing Net (Moskva-class
CVH) Price: $25 CDN
-
Landing net patterned on those fitted
to the Soviet Moskva-class helicopter carriers. Deck not included!
-
TWH02
1/72 Helicopter Landing Nets (Slava-class
CG) Price: $25 CDN
-
Landing net patterned on those fitted
to the Soviet Slava-class guided-missile cruisers. Deck not included!
-
TWH03
1/72 Helicopter Landing Net (Kresta
and Kara-class
CGs) Price: $25 CDN
-
Landing net patterned on those fitted
to the Soviet Kresta-1, Kresta-II, and Kara-class
guided-missile cruisers. Deck not included!
-
Hand-made Sandbags for
1/16 Models
TWSB2
Sandbags (set of 10) Price: $15 CDN
(2 sets for $28, 3 sets for $40)
-
Set of ten cotton sandbags, with
drawstrings, for use with any 1/16 models. These sandbags come empty, and
can be filled with sand, plaster, or other materials to the desired fullness
and then positioned as you see fit. Ideal for sandbag armour on vehicles,
holding down gun trails or mortar baseplates, revetments, trench walls, or
anything else that real sandbags are used for.
-
-
